SergeModular

Hi John, Joe here. The mixer part makes sense ( there is no grounding screw
so I'll use whichever one ) but what about the Frostwave with the wall
wart??? Thanks though for the info on the Makie..

Joe

>From: John Papiewski <johnp299792@...>
>Reply-To: SergeModular@yahoogroups.com
>To: SergeModular@yahoogroups.com
>Subject: Re: [SergeModular] Please help with grounding (please)
>Date: Wed, 28 May 2003 11:39:32 -0500
>
>If your Mackie has any posts on the back for grounding, this is where
>the U-shape thing goes. It will look like a silvery metal shaft fitted
>onto a similar looking bolt that sticks out the back of the mixer.
>
>If you don't see that, then look for any screw that looks grounded to
>the mixer's metal chassis. Loosen it up a little & slip the U connector
>underneath, then tighten it again. The banana part of the connector and
>the banana jack on your Serge power supply will connect together with a
>long banana cable. That should take care of your grounding.
>
>chorus72000 wrote:
> > Hi All, Joe here. Talked to Rex yesterday and it looks like
> > my "Animal" is shipping next week (joy)... but I've been thinking
> > about the grounding issues...Sooooo if someone has the time would
> > they mind giving me a walkthrough with my gear and how I would deal
> > with this issue = )...(please) I talked to Rex about it and he was
> > talking to me like I know what I'm doing ( I'm not a DIY person ) and
> > most likly the only "synth guy" affraid of electric currents... So
> > here's my set-up... I'll be using a Makie 1402VLZpro as my mixer ( so
> > I have to ground it )it has a regular 3 prong plug and as a sequencer
> > a Frostwave Fatcontroler which has an AC "wall wart" or power adaptor
> > ( as some like to call them )or wall hamster...I have one STS power
> > supply and two bannana to U attachement ( don't know the right term
> > for that one ) its a U shape that can be attached to screws... If
> > some one has the time please give me a step by step on this one so I
> > can get ready for next week... and honestly write it for "dumbasses"
> > cause I really don't know what I'm doing... Thanks in advance.
> >
> > Joeda...
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > SergeModular-unsubscribe@yahoogroups.com
> >
> > Keep on Patchin'!
> >
> >
> > Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*
http://join.msn.com/?page=features/virus