SergeModular

John,

or it may be that I am the Bozo of the year. This was how I tested the QTKB=
on
George's Serge: I took the TKB OUT A outputs of the QTKB, routed it into th=
e
QTKB INPUT 1 and used QKTB OUTPUT 1 to control the NTO. I assumed that
the TKB OUTS of the QTKB were just duplicates of the unquantized ROW
OUTPUTS of the TKB.

But if they are already quantized that would explains the delay/portamento =

(due to double quantization) I noticed. Am I right...errr...wrong?

And if the TKB OUTS of the QTKB are quantized outputs, how do the
unquantized TKB signals get into the QTKB panel (stupid question, but
anyway)? Does this connection has to be made by STS or can one do it on
his own (in case you buy the TKB and some time later a panel with a QTKB)?

Please help an ignorant…
Best regards
Jan-Hinnerk

--- In SergeModular@yahoogroups.com, John Papiewski <
johnp299792@a...> wrote:

> I've run my TKB quantizer thru hoops this morning, using the tkb part
> and the open channels and I don't hear any delay. I know there must be
> some delay since nothing on this earth responds in zero seconds but at
> least on mine (a one year old STS unit) it's not musically objectionable =

> in the least.
>
> Or I may just need to get my ears cleaned but that's another ball of wax =

> :O