SergeModular

--- In SergeModular@yahoogroups.com, DarkStr717@a... wrote:

> Hmmmm..... this is surprizing. Or else it's just not a factor in the music i
> make. I do agree on the ADSR to a point. The fact that nothing seems to
> happen till about 1o'clock is a relationship to the incoming voltage source;

I am not sure what you mean with "incoming voltage source". If you mean
voltages to control the ADSR times - we had nothing plugged into these jacks
of the ADSR. Just an NTO's variable wave output patched into the audio input
of the UAP (switched to Pan mode), the ADSR's output into the VC1+2 input,
Gain turned up at around 11 o'clock, and the TKB's KP output went into the
ADSR's Gate input.

> or else the system you worked on may have power supply problems.

Guess not - everything else on this Blue Fun Station worked perfectly and as
expected.

> Response time on my TKB and ADSR are quiet fast in my opinion. Don't
> know what to say to address your concerns. Maybe try another system.

To quote you: LMAO! ;-) Do you really think that these issues will keep me
away from the Serge? No way. Not having to integrate the QTKB and the
ADSR just gives me...more panel space to fill with other modules :-))

Best regards
Jan-Hinnerk

> ---In a message dated 2/2/03 3:49:50 PM, jan-hinnerk.helms@t... writes:
>
> << First, comparing the unquantized and quantized signal as it controlled an
> NTO through its 1V/Oct input revealed, that the QTKB's response times are
> quite audible - as a short but noticeable portamento, even when using the
> QTKB with the TKB as the input source.
>
> Second I was a little bit disappointed with the scaling of the Decay and
> Release times of the ADSR. As much as I appreciate a fine resolution of the
> shorter Decay and Release times, I have to say that it surprised me that the
> more noticeable changes in these times started occuring from 1 o'clock
> upwards of the control setting, regardless of the curve switch setting. >>