on 7/27/02 6:44 PM, circlesround at birdfrozentoabranch@... wrote:
Hello,I have a bit of a neophyte-ish question...
As john p. said, no problem. the mobius is quite well specified, and would make a neat complement to an animal panel.
as i'm sure you've done, take a look at the animal graphix at EGRES. at the most basic level, the mobius' CV out would control your oscillators and/or filter, and the mobius gate out would trigger your DTGs. but, since the mobius also has a 5+ accent out, you're able to do neat things to your filter and your wave multiplier as well. have fun: send a 5v trigger to your filter at the trig in!
(also as john said): you're going to need the right cables; in this case, 1/4" to banana, and you're then going to need to ground up the two machines. grounding, in this case, would be as easy as running the ground signal from the back of the serge power supply to a jack sleeve on the mobius.
keep in mind the mobius runs one sequence at a time. if and when you upgrade to a larger system, you can either add a TKB, another mobius, or do what i've done: get a doepfer maq 16/3 (around $500 used, i think), which has quite a different OS/hardware setup than the mobius and runs three sequences at once.
enjoy! let us know how you make out.
blake, your humble moderator
m. blake wilson is OdysseySounds
email: mbw@...
web: http://members.cox.net/mbw/construction.htm
music: http://artists.mp3s.com/artists/242/matthew_b_wilson.html
serge: http://groups.yahoo.com/group/SergeModular/