Blake - thanks again for the reply - so I have gate 1
out to the gate on the asdr and the out of asdr into
the vca. In this setup I have cv 1 out into 1v/oct on
the nto - then I repatched the asdr cv out to my cv
pro along with cv out 3 (from exp.) which is set to
velocity . Still no effect. (no matter what the amount
is set to - on the exp.)
The exp. manual says that you use cv & gate as pairs
but cv 2 out tracks fine into another pco at the
1v/oct. without the corresponding gate. Where would
that (gate 2 out) go anyway ?? - g. man
__________________________________________________
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com
out to the gate on the asdr and the out of asdr into
the vca. In this setup I have cv 1 out into 1v/oct on
the nto - then I repatched the asdr cv out to my cv
pro along with cv out 3 (from exp.) which is set to
velocity . Still no effect. (no matter what the amount
is set to - on the exp.)
The exp. manual says that you use cv & gate as pairs
but cv 2 out tracks fine into another pco at the
1v/oct. without the corresponding gate. Where would
that (gate 2 out) go anyway ?? - g. man
__________________________________________________
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com