-----Original Message-----
From: BrightBoy [mailto:jdec@...]
Sent: Wednesday, September 05, 2001 2:01 PM
To: analog heaven
Subject: Re: [AH] MKS-80 power supply
transfomer in the MKS-80 in which you could configure the input of
the transformer for 110V or 220V/240V
If it's a fixed 240V transformer, then you'll have to see if Roland
still has the 110V version in stock
Jeff
From: BrightBoy [mailto:jdec@...]
Sent: Wednesday, September 05, 2001 2:01 PM
To: analog heaven
Subject: Re: [AH] MKS-80 power supply
> I found a MKS/MPG-80 at a good price and it is 240V. Is there a way toYou'll have to check the schematics to see if there is a multi-tap
> swap its power supply for a 110V? Replace the transformer?
transfomer in the MKS-80 in which you could configure the input of
the transformer for 110V or 220V/240V
If it's a fixed 240V transformer, then you'll have to see if Roland
still has the 110V version in stock
> If not, looks like a job for a $20 step down. Additional bulk to makeYou would need an external 110V to 240V *STEP UP* transformer
> live sets harder to setup.
Jeff