Hello.
Sorry I dont think I can make the
sequencer again !
It is very fiddly, and those Roland
knobs are super expensive.
[Maybe a simpler version in the future]
The 175 is a bit easier [less controls]
The price I have not worked out yet, due
to quotes on the panel manufacture.
But wont be cheap, probably at least £275.
--ryk--
--- In RolandSystem100m@yahoogroups.com, Bakis Sirros
2000@...> wrote:
>
> hello,
> yes, i would be interested for the 175 triple vactrol
> bandpass filter.
> also, if you would make an 183 sequencer like that in
> the pic, i would be interested in that too!
> what would the prices per module be, roughly?
> best regards,
> Bakis.
>
>
> --- ryktnk wrote:
>
> >; Hello Group.
> >
> > Have been working on some new 100m Modules.[!]
> > [well one from history and one from new]
> >
> > 170 Pitch to Voltage converter/Envelope Follower
> > 175 Triple Vactrol Bandpass Filter
> >
> > The 170 is based on the module from
> > the Roland 700 system, but modified to work
> > with the 100m.
> >
> > The 175 is similar to the Korg Resonator, but
> > can be used in series or parallel with mixed
> > outputs, or as three separate filters. Plus
> > control for resonance.
> >
> > Might make more than one, would anybody be
> > interested in buying it?
> > This might make the panels cheaper, as they
> > are expensive for one.
> >
> > Dont hold you breath tho, I have a day job !
> >
> > Here's a link to the sequencer made from
> > MFOS design.
> >
> http://www.flickr.com/photos/ryktnk/sets/72157594275065624/
> >
> > -ryk-
> >
> >
>
>
> Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
> [Doepfer_a100] group owner
>; http://www.parallel-worlds-music.com
> http://www.myspace.com/parallelworldsmusic
> http://www.myspace.com/interconnectedmusic
> http://www.myspace.com/memorygeist
> http://www.DiN.org.uk
> http://www.shimarecords.co.uk
> http://www.rubber.gr
> Athens-Greece
>
>
>
>
__________________________________________________________
> 8:00? 8:25? 8:40? Find a flick in no time
> with the Yahoo! Search movie showtime shortcut.
> http://tools.search.yahoo.com/shortcuts/#news
>
Message
Re: [RolandSystem100m] Re: New Modules
2007-06-04 by R J
Put me down for one.
Now what I would like to see is a vacuum tube based wave shaper/distortion module using some tiny "subminiature" dual triode tubes (they are only about 35mm long and maybe 5-10mm wide). That would be sweet... and would help me find something to do with the several thousand pieces I have in my garage right now. =)
Rob
On May 25, 2007, at 1:49 AM, ryktnk wrote: