Yahoo Groups archive

QTR-Quadtone RIP

Index last updated: 2026-04-28 23:12 UTC

Message

RE: [QuadtoneRIP] 2.4.3.10

2006-11-17 by Stephen Billard

Both problems are corrected in version 2.4.3.15 now posted on the QTRgui page. 


-Stephen
 www.sbillard.org/Stephen

-----Original Message-----
From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On Behalf
Of Tom Moore
Sent: Thursday, November 16, 2006 4:49 PM
To: QuadtoneRIP@yahoogroups.com
Subject: RE: [QuadtoneRIP] 2.4.3.10

Stephen

My testing seems to confirm that a problem exists in this area. When I start up
QTR now, the Printing Model model defaults to Quad2200. If select a curve set
within that model, and exit, that curve set is still selected when I restart.
However, if I select another model and curve set and then restart, the printer
model reverts to Quad2200 Printing Model and the curve selection is reset to
blank. This behaviour is different from the previous version (I think).

On another note, if I start QTR and while it's already running (which I did by
mistake), QTR crashes with an access violation. Obviously I shouldn't be doing
that, but I shouldn't be able to cause a crash either.

Tom Moore

> -----Original Message-----
> From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] 
> On Behalf Of Stephen Billard
> Sent: Thursday, November 16, 2006 6:27 PM
> To: QuadtoneRIP@yahoogroups.com
> Subject: RE: [QuadtoneRIP] 2.4.3.10
> 
> You should not have to. These settings are stored in an "ini" file in 
> your Documents and Settings folder. Look under "Application Data/QuadToneRIP".
> The
> only reason the settings might not get updated is if QTRgui does not 
> close normally.
> 
...
> -----Original Message-----
> From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] 
> On Behalf Of phkowalchuk
> Sent: Wednesday, November 15, 2006 10:17 PM
> To: QuadtoneRIP@yahoogroups.com
> Subject: [QuadtoneRIP] 2.4.3.10
> 
> Just upgraded. I wonder why every time I use the app, I have to reset 
> my printing model and curves? In the 2.3 version I had prior, this was 
> not the case. Yet my ink limit and gamma adjustments are remembered.
> 
> 
> 



 
Yahoo! Groups Links

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.