PLAN B analog blog

-----Original Message-----
From: PLAN_B_analog_blog@yahoogroups.com
[mailto:PLAN_B_analog_blog@yahoogroups.com] On Behalf Of (i think you
can figure that out)
Sent: 21 July 2007 17:33
To: PLAN_B_analog_blog@yahoogroups.com
Subject: [PLAN_B_analog_blog] IMPORTANT - Model 15 Calibration Procedure
Uploaded

All,

Ive uploaded a calibration procedure for the Model 15 VCO which will
give you step by step, east to follow instructions for adjusting 1v/oct
tracking, triangle wave symmetry, sinewave purity and rampwave symmetry.
All important stuff.  There are more diagrams and photos than you'll
need to do it.  It's simple and I dare say fun.

If you;re using your system all the time I recommend that you do this
once a month. If you find after a couple of months that they are still
in cal, back off the interval - but once a month is a good starting
point.

here's the link:

www.ear-group.net/planb_m15_cal_procedure.pdf

There's also a link on the M15 product page at the EAR site.  

I haven't fully proof read the document yet.  IF you find problems - let
me know offline.

hope this helps,

- P





 
Yahoo! Groups Links





This email was sent to you by Reuters, the global news and information company. 
To find out more about Reuters visit www.about.reuters.com

Any views expressed in this message are those of the individual sender, 
except where the sender specifically states them to be the views of Reuters Limited.

Reuters Limited is part of the Reuters Group of companies, of which Reuters Group PLC is the ultimate parent company.
Reuters Group PLC - Registered office address: The Reuters Building, South Colonnade, Canary Wharf, London E14 5EP, United Kingdom
Registered No: 3296375
Registered in England and Wales