PLAN B analog blog

Due to the fact that the Model 1 connects to either a Deopfer,
Analogue Solutions or Analogue Systems power buss, any improvement it
could bring to quell ground noise gets washed out with those buss
board's daisy chained grounds.

- 




--- In PLAN_B_analog_blog@yahoogroups.com, "Don Kim" <dkimcg@...> wrote:
>
> Does the PlanB power rail prevent this?  I've never had any cross talk
> problems, but both my M15s are on the PlanB power board.  They're the
> only two oscillators in that case.  I haven't had any crosstalk
> problems at all.with the M15 or AFG which is the only oscillator on
> it's bus too, or any other oscillators.  Occationally I have a little
> weirdness when multing something, but the buffered mult seems to have
> solved that problem for me.
> 
> 
> 
> On Sat, Dec 6, 2008 at 9:54 AM, (i think you can figure that out)
> <peter@...> wrote:
> > Hi guys.
> >
> > I've found a change which significantly improves the amount of bleed
> > across the A/B channels on the Model 9 Mixer. I'll be happy to post
> > it (it's a snap), but you guys gotta promise me it's not going to end
> > up on some blog somewhere that we release goods with known defects or
> > some such nonsense. Trust me, it's happened. It doesn't happen when
> > other manufacturers post these types of things...but it does with us.
> >
> > I've obviously had it 'up to here' with Plan B blog bashing.
> >
> > So, before I do this...we gotta deal?
> >
> > - P
> >
> >
>