PLAN B analog blog

Hi Peter

Its not functioning at all. All the outputs of the M15 (and an AFG I
also tested while the M15 was plugged in) seem to output the buzz of
the ower supply. It seems to be tripping the power supply as nothing
else functions. If I take it out everything is fine again. 

I also tried taking a couple other modules out in case it was
overloading the supply. Hope its not bruk! :-/
And yes the red band is up, and the connector is keyed at the other end. 


Thanks


--- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure
that out)" <peter@...> wrote:
>
> Are u saying the VCO does not function, that it's silent and it makes
> the PSU buzz, or are you saying it operates and the PSU busses along
> with it?
> 
> Which model to you have:  the Rev 1 series or the Rev. 2 series?
> 
> If 1:  Are you making sure the red band is UP on the module side and
> conversely the correct orientation on the A. Sll side??
> 
> If it is operating, just making the PSU buzz you're probably very
> close to the edge of the current rail on the A. Sol power spply.
> 
> 
> 
> 
> --- In PLAN_B_analog_blog@yahoogroups.com, "elemental"
> <adam.elemental@> wrote:
> >
> > I just received a Model 15 VCO I bought 2nd hand, shipped from Italy
> > to UK. When plugged in (and double checked its all correct) to the
> > power supply in my Analogue SOLUTIONS case I get nothing but a buzzing
> > from the power supply. If I take it out all is fine again. I've had
> > this before with loose power connections so I guess its some sort of
> > grounding issue? I checked the module over and cant see any loose
> > chips or wires. 
> > 
> > Any suggestions?
> > Thx
> >
>