PLAN B analog blog

--- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure
that out)" <peter@...> wrote:
>

> Functional Problems Associated with the Model 10 Self Cycle:  This one
> is more an operator issue. but here's the facts:  If you're running in
> self-cycle mode, do not insert an external trigger.  If the module
> that's producing that external trigger conforms to Doepfer's
> electrical specs (ours do), it'll be fine.  However some products
> currently available in Euro format do not, a matter of fct some are as
> high as 12 volts (Doepfer spec is 5) and if those happen to run into
> the Model 10s self trigger signal D4 blows up.
> 

One of my M10s don't self cycle properly, I can work around the
problem by triggering it with it's end of cycle output, but is it
possible that D4 blew up?  

-Don