PLAN B analog blog

Yes.  there is a block of four jumpers on the corner of the ADSR
board. They come with the module. Each is labeled to whatit controls
A, D, S or R.  With three rows of four functions, each jumper can be
placed to short the top two or bottom two positions of any given row.

hope this helps.

- P

--- In PLAN_B_analog_blog@yahoogroups.com, "argitoth" <argitoth@...>
wrote:
>
> Peter, are the jumpers for shortening the ADR times in the Elf 
> Envelope? I'm not exactly sure what you are saying about the jumpers. 
> I did want to shorten the ADR times of the Elf Envelope because the 
> knobs are waaay too sesnsitive even after having adjusted the trimpot. 
> Are you still working on the fix for this?
>