PLAN B analog blog

So, my VCOs are brand new, and the sync sounds nothing like this.  I 
sorta wish it did.  I assume that I have what was the stock sync when 
this e-mail came out and that is because of the impending model 15a.  
Am I correct about any of this?  If so, what's the latest on the ETA 
for the 15a?

Thanks-
dave

--- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure 
that out)" <peter@...> wrote:
>
> Just to show that I listen to ou guys,  if you want to make your 
Model 15 sync from what it is 
> stock to a very hard, change R28 (a 56K horizontally-positioned 
resistor right below the 
> SYNC wire on the PCB to 10K.  Another option is just floating a 12k 
over the 56K without 
> removing it - so you solder the leads of the 12 to the leads of the 
56K.  Just make sure those 
> leads don't touch anything else if you go that route.
> 
> This is what it'l sound like:
> 
> http://www.ear-group.net/hardsync.mp3
>  
> 
> (I am also sweeping the frequency of the VCO you're listening to in 
this sample)
> 
> I will shipping all new VCOs with this mod in.
> 
> - P
>