PLAN B analog blog

Whoops!  well, there goes that explanation...

No can do.  The Model 29 is a completely passive circuit - no
electricity.  The attenuators are as the should be for the cleanest
result - no power, they get their ground reference from the patchcords
connected to them. But since you've got an M14, again...you're doing
this function already.

One thing to keep in mind is outside of the M24, almost every VC input
on Plan B modules have bi-directional attenuators, so you're pretty
covered here if you stick to the 'family'.




--- In PLAN_B_analog_blog@yahoogroups.com, "jalmari3"
<jari.jokinen@...> wrote:
>
> I was commenting on M29, which might benefit from active circuitry a 
> la Syntesizers.com Q147 Distributor. (BTW, I have a M14 already)
> 
> Best regards
> Jari Jokinen 
> 
> --- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure 
> that out)" <peter@> wrote:
> >
> > Jari,
> > 
> > If you're willing to pay more, then think about getting a Model 14
> > instead because it can do everything you've mentioned here :)
> > 
> > It would require a completely different circuit to do this with a 
> M9.
> >  Secondly, I feel having an automatic DC applied to the NC contacts 
> a
> > questionable modification on an audio mixer because it would offset
> > your AC's symmetry (raise or lower it away from center). I'm not 
> sure you want this.
> > 
> > Again, think about a Model 14 - I think this is what you're needing!
> > 
> > - P
> > 
> > 
> > 
> > --- In PLAN_B_analog_blog@yahoogroups.com, "jalmari3"
> > <jari.jokinen@> wrote:
> > >
> > > I would gladly pay extra for an active version with bipolar 
> attenuators
> > > and voltage source capability (when no signal is inserted). Like
> > > Syntesizers.com Q147 Distributor:
> > > http://www.synthesizers.com/q147.html
> > >
> > > Best regards
> > > Jari Jokinen
> > >
> > > --- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can 
> figure
> > > that out)" <peter@> wrote:
> > > > 2)  The third in our utility module series, the Model 29 
> Dynamic Mult
> > > > is a unique 1-to-5 signal splitter in which four of the outputs 
> are
> > > > equipped with manual level pots, allowing for both contour 
> control and
> > > > signal distribution. The perfect companion for non-attenuated VC
> > > > inputs, the Model 29 requires no power supply connection to 
> operate as
> > > > it takes it's ground reference from the cables patched into it.
> > > >
> > > > go here for more details:
> > > >
> > > > http://www.ear-group.net/model_29.html
> > > >
> > >
> >
>