PLAN B analog blog

The Power system has had a couple of upgrades since Alessandro first
took possesion of the system, but currently it's powered by a 1.7 amp
Power One supply which is mounted in the case behind the lower right
modules.

Power distribution is handled via a long linw of Plan B Model 1 boards
mounted on a single Vector rail which runs across the length of the
chassis at the center, hung about 4 inches from the back of the
modules and bolted to the front rail by a series of standoffs.  This
way it's not directly connected to the case wall and is somewhat
protected from bumping due to that.

the rails are Vector T struts. Do a search in this blog - they're
mentioned a few times on in this group. They are svailible at Mouser

hope this helps,

 P

--- In PLAN_B_analog_blog@yahoogroups.com, "gabu_004" <gabu_004@...>
wrote:
>
> Hello Peter,
> 
> I'm woundering how does the power distribution works in the NIN custom 
> case and what type of power supply is being used...
> I mean I'm planning to build myself a roadcase/modular synth and I'm 
> trying to avoid buying doepfer's bus board to reduce as much as 
> possible the building cost... Also what is being used for the railing 
> there?
> 
> Thanks
> 
> g.
>