Mellotronists

The WORST thing you can do is turn off the demag
device close to the heads....that REALLY magnetizes
them and you'll have to float the wand over the head a
little longer when you resume. Don't use a demag with
an on/off switch. Just get a Han-D-Mag and you'll be
fine.
--- john barrick <astroboy@...> wrote:

> Good Morning all - I'm in the process of demagging
> the heads on 1407 and
> am following Ken Leonard's procedure as detailed on
> his web site. If
> you end up bumping one of the heads with the end of
> the demagger (wand
> type), do you simply repeat the process for that
> head? If your thumb
> slips off the demagger's spring loaded switch while
> inches away from the
> headblock, is it safe to assume that you need to
> start the whole
> procedure over again?
>
> Thanks (I don't want to erase any tapes),
>
> john barrick (saving pennies for my M4000)
>

____________________________________________________________________________________Choose the right car based on your needs. Check out Yahoo! Autos new Car Finder tool.
http://autos.yahoo.com/carfinder/