Hi all-
My M400 tone control is non-operational, thought I
would dig into the problem. Tested it, wiper appears
to be open. Reads 32K for the full value between the
other terminals. Is this a correct value, and is this
pot linear or log(audio) taper? I don't have
schematics yet. This machine has 2 cards in the
preamp box, pots have plastic shafts. May as well get
the volume pot value, too, if it is not too much
trouble.
Thanks
-Bruce Daily
M400 #1221
PS- The control knobs on Mark Wallis' WEM Audiomaster
mixer look quite familiar...
____________________________________________________________________________________Got a little couch potato?
Check out fun summer activities for kids.
http://search.yahoo.com/search?fr=oni_on_mail&p=summer+activities+for+kids&cs=bz
My M400 tone control is non-operational, thought I
would dig into the problem. Tested it, wiper appears
to be open. Reads 32K for the full value between the
other terminals. Is this a correct value, and is this
pot linear or log(audio) taper? I don't have
schematics yet. This machine has 2 cards in the
preamp box, pots have plastic shafts. May as well get
the volume pot value, too, if it is not too much
trouble.
Thanks
-Bruce Daily
M400 #1221
PS- The control knobs on Mark Wallis' WEM Audiomaster
mixer look quite familiar...
____________________________________________________________________________________Got a little couch potato?
Check out fun summer activities for kids.
http://search.yahoo.com/search?fr=oni_on_mail&p=summer+activities+for+kids&cs=bz