Yahoo Groups archive
Thread
2005-03-12 by larry meadows
I am looking for the part identification for the attached . The part is missing from my 1970 Marcos, and want to know if the Factory left it out or is it not needed?This is the first time the suspension has been dis-assembled sence new. I am doing a complete frame off restoration. Larry 3V5536 --------------------------------- Do you Yahoo!? Yahoo! Small Business - Try our new resources site!
2005-03-12 by J. Myers
----- Original Message -----From: larry meadowsSent: Saturday, March 12, 2005 2:37 AMSubject: [MarcosManiacs] suspension inquiryI am looking for the part identification for the attached .The part is missing from my 1970 Marcos, and want to know if the Factory left it out or is it not needed?This is the first time the suspension has been dis-assembled sence new.I am doing a complete frame off restoration.Larry3V5536Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
2005-03-12 by larry meadows
Jac. The part that the arrow is supposed to point to is the first 'ring' from the upright. The picture shows differant than I indicated. Something about MS Word. Regards Larry 3v5536 "J. Myers" <jacob@...> wrote: Hello Larry As far as I know all the triumph uprights are the same i.e. Spitfire, Vetesse, GT6.etc. From memory the only difference is, the stub shaft for the GT6 is around .060" thicker. This may also be true of course for the 2ltr Vitesse From what I can gain from the picture you included, the part you are trying to identify is actually part of the up right. I hope this is of some help. Regards Jac
----- Original Message ----- From: larry meadows To: marcosmaniacs@yahoogroups.com Sent: Saturday, March 12, 2005 2:37 AM Subject: [MarcosManiacs] suspension inquiry I am looking for the part identification for the attached . The part is missing from my 1970 Marcos, and want to know if the Factory left it out or is it not needed?This is the first time the suspension has been dis-assembled sence new. I am doing a complete frame off restoration. Larry 3V5536 --------------------------------- Do you Yahoo!? Yahoo! Small Business - Try our new resources site! Yahoo! Groups SponsorADVERTISEMENT --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/MarcosManiacs/ To unsubscribe from this group, send an email to: MarcosManiacs-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. --------------------------------- Do you Yahoo!? Yahoo! Small Business - Try our new resources site!
2005-03-12 by Claudine and Danny
-----Original Message-----
From: larry meadows [mailto:lmeadowsw@...]
Sent: Saturday, March 12, 2005 9:02 AM
To: MarcosManiacs@yahoogroups.com
Subject: Re: [MarcosManiacs] suspension inquiryJac.The part that the arrow is supposed to point to is the first 'ring' from the upright. The picture shows differant than I indicated. Something about MS Word.RegardsLarry3v5536
"J. Myers" wrote:Hello LarryAs far as I know all the triumph uprights are the same i.e. Spitfire, Vetesse, GT6.etc.From memory the only difference is, the stub shaft for the GT6 is around .060" thicker.This may also be true of course for the 2ltr VitesseFrom what I can gain from the picture you included, the part you are trying to identify is actually part of the up right.I hope this is of some help.Regards Jac----- Original Message -----From: larry meadowsSent: Saturday, March 12, 2005 2:37 AMSubject: [MarcosManiacs] suspension inquiryI am looking for the part identification for the attached .The part is missing from my 1970 Marcos, and want to know if the Factory left it out or is it not needed?This is the first time the suspension has been dis-assembled sence new.I am doing a complete frame off restoration.Larry3V5536Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
2005-03-12 by larry meadows
Thanks, Danny. A water shield sounds reasonable. I guess the '70 did not have one, The arrow doesn't point to the right part on some E-mails, Regards, Larry 3V5536 Claudine and Danny <steinpom@...> wrote: Larry, I've looked through my spitfire and Lotus 7 manuals. The uprights shown are the 3 bolt pattern, but they do show a similar part which is entitled water sheild. Maybe that's what it is. Danny #5201
-----Original Message----- From: larry meadows [mailto:lmeadowsw@...] Sent: Saturday, March 12, 2005 9:02 AM To: MarcosManiacs@yahoogroups.com Subject: Re: [MarcosManiacs] suspension inquiry Jac. The part that the arrow is supposed to point to is the first 'ring' from the upright. The picture shows differant than I indicated. Something about MS Word. Regards Larry 3v5536 "J. Myers" <jacob@...> wrote: Hello Larry As far as I know all the triumph uprights are the same i.e. Spitfire, Vetesse, GT6.etc. From memory the only difference is, the stub shaft for the GT6 is around .060" thicker. This may also be true of course for the 2ltr Vitesse From what I can gain from the picture you included, the part you are trying to identify is actually part of the up right. I hope this is of some help. Regards Jac ----- Original Message ----- From: larry meadows To: marcosmaniacs@yahoogroups.com Sent: Saturday, March 12, 2005 2:37 AM Subject: [MarcosManiacs] suspension inquiry I am looking for the part identification for the attached . The part is missing from my 1970 Marcos, and want to know if the Factory left it out or is it not needed?This is the first time the suspension has been dis-assembled sence new. I am doing a complete frame off restoration. Larry 3V5536 --------------------------------- Do you Yahoo!? Yahoo! Small Business - Try our new resources site! --------------------------------- Do you Yahoo!? Yahoo! Small Business - Try our new resources site! Yahoo! Groups SponsorADVERTISEMENT --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/MarcosManiacs/ To unsubscribe from this group, send an email to: MarcosManiacs-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. --------------------------------- Do you Yahoo!? Yahoo! Mail - Helps protect you from nasty viruses.
2005-03-13 by Garry Diver
Hi Larry, Don't worry about it. You have GT6 suspension so use the Victoria British parts. Will you be at Sebring for the !2 hour. I will be there for the Vintage race with the Marcos. Garry
>From: larry meadows <lmeadowsw@...> >Reply-To: MarcosManiacs@yahoogroups.com >To: MarcosManiacs@yahoogroups.com >Subject: RE: [MarcosManiacs] suspension inquiry >Date: Sat, 12 Mar 2005 15:31:48 -0800 (PST) > >Thanks, Danny. > >A water shield sounds reasonable. I guess the '70 did not have one, >The arrow doesn't point to the right part on some E-mails, >Regards, >Larry >3V5536 > >Claudine and Danny <steinpom@...> wrote: >Larry, > >I've looked through my spitfire and Lotus 7 manuals. The uprights shown >are the 3 bolt pattern, but they do show a similar part which is entitled >water sheild. Maybe that's what it is. > >Danny >#5201 >-----Original Message----- >From: larry meadows [mailto:lmeadowsw@...] >Sent: Saturday, March 12, 2005 9:02 AM >To: MarcosManiacs@yahoogroups.com >Subject: Re: [MarcosManiacs] suspension inquiry > > >Jac. >The part that the arrow is supposed to point to is the first 'ring' from >the upright. The picture shows differant than I indicated. Something about >MS Word. > >Regards >Larry >3v5536 > >"J. Myers" <jacob@...> wrote: >Hello Larry >As far as I know all the triumph uprights are the same i.e. Spitfire, >Vetesse, GT6.etc. >From memory the only difference is, the stub shaft for the GT6 is around >.060" thicker. >This may also be true of course for the 2ltr Vitesse >From what I can gain from the picture you included, the part you are trying >to identify is actually part of the up right. >I hope this is of some help. >Regards Jac >----- Original Message ----- >From: larry meadows >To: marcosmaniacs@yahoogroups.com >Sent: Saturday, March 12, 2005 2:37 AM >Subject: [MarcosManiacs] suspension inquiry > > >I am looking for the part identification for the attached . >The part is missing from my 1970 Marcos, and want to know if the Factory >left it out or is it not needed?This is the first time the suspension has >been dis-assembled sence new. >I am doing a complete frame off restoration. > >Larry >3V5536 > > >--------------------------------- >Do you Yahoo!? >Yahoo! Small Business - Try our new resources site! > > > >--------------------------------- >Do you Yahoo!? >Yahoo! Small Business - Try our new resources site! > >Yahoo! Groups SponsorADVERTISEMENT > > >--------------------------------- >Yahoo! Groups Links > > To visit your group on the web, go to: >http://groups.yahoo.com/group/MarcosManiacs/ > > To unsubscribe from this group, send an email to: >MarcosManiacs-unsubscribe@yahoogroups.com > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > >--------------------------------- >Do you Yahoo!? > Yahoo! Mail - Helps protect you from nasty viruses.