Marcos Maniacs group photo

Yahoo Groups archive

Marcos Maniacs

Index last updated: 2026-04-28 23:07 UTC

Thread

Adjustable bonnet/ Jac Myers

Adjustable bonnet/ Jac Myers

2002-11-18 by Don Lattimer

Jac,

I love your set-up for the adjustable bonnet but my brain can't 
figure out the drawings.  Maybe I'm missing something....

Would it be possible to email me the drawings, or better yet, could 
you take some pics and email them??  I'd appreciate it because my 
bonnet is coming off and I need to redo the wood mounts anyways.

Thanks,

Don Lattimer
#3m5759

Re: [MarcosManiacs] Adjustable bonnet/ Jac Myers

2002-11-18 by Jack Myers

Don
I think perhaps a sketch as apposed to a technical drawing, may travel better. I shall endeavour to send a sketch over the next day or so. Regards Jac.
Show quoted textHide quoted text
----- Original Message -----
Sent: Monday, November 18, 2002 4:32 AM
Subject: [MarcosManiacs] Adjustable bonnet/ Jac Myers

Jac,

I love your set-up for the adjustable bonnet but my brain can't
figure out the drawings. Maybe I'm missing something....

Would it be possible to email me the drawings, or better yet, could
you take some pics and email them?? I'd appreciate it because my
bonnet is coming off and I need to redo the wood mounts anyways.

Thanks,

Don Lattimer
#3m5759


To unsubscribe from this group, send an email to:
MarcosManiacs-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: [MarcosManiacs] Adjustable bonnet/ Jac Myers

2002-11-23 by Jack Myers

Hello Don
Here are the drawings that I promised, I hope that there is enough information on them.
As you will see the spigot is eccentrically drilled and tapped 8mm it is held to the chassis rail with an 8 mm socket cap screw. I made a plate to fit inside the rail (opposite side to the spigot) about2" long to spread the load. Better than a washer I thought.
Any question at all please don't hesitate to ask.
Keep on Marcosising. Regards Jac.
Don, I just realised that if you don't have Auto Cad you will not be able to open these attachments. Drawings will follow shortly.
Show quoted textHide quoted text
----- Original Message -----
Sent: Monday, November 18, 2002 4:32 AM
Subject: [MarcosManiacs] Adjustable bonnet/ Jac Myers

Jac,

I love your set-up for the adjustable bonnet but my brain can't
figure out the drawings. Maybe I'm missing something....

Would it be possible to email me the drawings, or better yet, could
you take some pics and email them?? I'd appreciate it because my
bonnet is coming off and I need to redo the wood mounts anyways.

Thanks,

Don Lattimer
#3m5759


To unsubscribe from this group, send an email to:
MarcosManiacs-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: [MarcosManiacs] Adjustable bonnet/ Jac Myers

2002-11-23 by Jack Myers

Here again Don
I trust that you receive these attachments OK.
Regards Jac
Show quoted textHide quoted text
----- Original Message -----
Sent: Monday, November 18, 2002 4:32 AM
Subject: [MarcosManiacs] Adjustable bonnet/ Jac Myers

Jac,

I love your set-up for the adjustable bonnet but my brain can't
figure out the drawings. Maybe I'm missing something....

Would it be possible to email me the drawings, or better yet, could
you take some pics and email them?? I'd appreciate it because my
bonnet is coming off and I need to redo the wood mounts anyways.

Thanks,

Don Lattimer
#3m5759


To unsubscribe from this group, send an email to:
MarcosManiacs-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.