Hello Don
Here are the drawings that I promised, I hope that
there is enough information on them.
As you will see the spigot is eccentrically drilled
and tapped 8mm it is held to the chassis rail with an 8 mm socket cap screw. I
made a plate to fit inside the rail (opposite side to the spigot) about2" long
to spread the load. Better than a washer I thought.
Any question at all please don't hesitate to
ask.
Keep on Marcosising. Regards
Jac.
Don, I just realised that if you don't have Auto
Cad you will not be able to open these attachments. Drawings will follow
shortly.
----- Original Message -----From: Don LattimerSent: Monday, November 18, 2002 4:32 AMSubject: [MarcosManiacs] Adjustable bonnet/ Jac MyersJac,
I love your set-up for the adjustable bonnet but my brain can't
figure out the drawings. Maybe I'm missing something....
Would it be possible to email me the drawings, or better yet, could
you take some pics and email them?? I'd appreciate it because my
bonnet is coming off and I need to redo the wood mounts anyways.
Thanks,
Don Lattimer
#3m5759
To unsubscribe from this group, send an email to:
MarcosManiacs-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.