Re: How about part numbers for shocks??
2006-03-25 by Don Lattimer
Mike, I don t know if you ll find Spax to fit the Marcos out of the box . I use AVO adjustables (www.avouk.com)on mine and am quite satisfied. Look at the
Messages
Browse messages
Page 45 of 112 · 5570 messages matched
Re: [MarcosManiacs] Re: How about part numbers for shocks??
2006-03-25 by Mike Sullivan
The vehicle has a live axle, 3.08 limited slip ... __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best
Re: How about part numbers for shocks??
2006-03-24 by Don Lattimer
Do you have IRS rear end or live axle?? I believe the dampers are different. Some of the UK folk use GAZ shocks also. Don #3M5759
How about part numbers for shocks??
2006-03-24 by Mike Sullivan
My 85 Marcos Mantula 3.5V8 EFI has only 10K miles therefor the springs are good but I need a model number for either a set of on the car adjustable Koni s or
RE: [MarcosManiacs] Got my 1600GT home, not encouraged so far.....
2006-03-24 by Garry Diver
Sorry to hear about the condition. If you want to chat about the rebuild options, give me a call. I have made some changes to mine in the rebuild process and
Got my 1600GT home, not encouraged so far.....
2006-03-24 by marcos1600
Got it home, not encouraged so far. Definitely has some rot, but I will not be able to asses it properly until morning. Doors do not close and align properly,
RE: [MarcosManiacs] Car Shipping
2006-03-22 by John Sutton
Henrik, I have no idea how that happened!! John _____ From: MarcosManiacs@yahoogroups.com [mailto:MarcosManiacs@yahoogroups.com] On Behalf Of Henrik Ogstedt
SV: [MarcosManiacs] Car Shipping
2006-03-22 by Henrik Ogstedt
Hi, I think this mail came a little wrong… Best regards from sweden Henrik Ogstedt Bebyggelseantikvarie Kjellestadsgatan 1B 41472 Göteborg 031-120164,
Car Shipping
2006-03-21 by Paul Weidner
Hi Garry, Sent you an email regarding the car you re shipping over here, need to get in contact. Thanks, Paul
Re: Rescuing a 1600 GT for restoration.
2006-03-10 by giuliasuper66
Hi again. You are so right. The car in the picture looks like a steelframed car but i dont know if it´s any big difference. It is a very nice engine with a
Re: [MarcosManiacs] Re: Rescuing a 1600 GT for restoration.
2006-03-09 by Richard Brengman
Alfa engine in a Marcos. If he could do it, so can I. I will probably have to use a narrow type oil pan. Richard Brengman DBA, Special Interest Arms 1422-A
Re: Rescuing a 1600 GT for restoration.
2006-03-09 by giuliasuper66
Hi, I am old alfisti that resently bought a 1600 marcos with chassi number #5178, the car after yours Bob and only a few after yours Richard. My car is i near
1600 X-flow stage one Vulcan head on eBay.
2006-03-09 by marcos1600
Item #8044417051 Bidding to start at $600, no bids so far, three days left as I post this. Appears new in the pics. Imported from U.K., not FF legal, might be
Re: [MarcosManiacs] Rescuing a 1600 GT for restoration.
2006-03-09 by Bob Magnotti
Richard, Great to hear another 1600GT is being revived. My 1600GT is number 5179, real close to your number. It would be interresting to see how similarly
Re: Spax Shocks
2006-03-08 by Hampton Peterson
... rear. ... Mike, Try www.HeritageGarage.com they are a dealer for Spax in the U.S. Regards, Hampton Peterson #3M5463
Re: [MarcosManiacs] Rescuing a 1600 GT for restoration.
2006-03-08 by Don Lattimer
Richard, I ll add your car to the North American Marcos Registry. Don (Moderator) ... From: Richard Brengman To: MarcosManiacs@yahoogroups.com Sent: Wednesday,
Re: [MarcosManiacs] Rescuing a 1600 GT for restoration.
2006-03-08 by Richard Brengman
Just got the chassis number for my Marcos 1600 GT. #5159 Richard Brengman DBA, Special Interest Arms 1422-A Industrial Way Gardnerville, NV. 89410 (775)
Re: [MarcosManiacs] Rescuing a 1600 GT for restoration.
2006-03-08 by Richard Brengman
1968 1600 GT, wood chassis. I do not have the chassis number yet. How much for a windscreen? Who made it? How much for a set of correct wheels? Richard
RE: [MarcosManiacs] Rescuing a 1600 GT for restoration.
2006-03-08 by Garry Diver
Hi There, Welcome to Marcos ownership. I have no idea what the previous owner could have spent that money on given the condition it is in. I have most of the
Rescuing a 1600 GT for restoration.
2006-03-08 by marcos1600
Finally gave up and re-registered for this board as Yahoo would not recognize my old pass-word. I recently bought a 1600 GT that is in need of full
Spax Shocks
2006-03-08 by Mike Sullivan
Looking for a source for my 85 Mantula 3.5 V8 EFI both front and rear. Don t need the springs (the car has only 10K on it). #8150
RE: [MarcosManiacs] Re: Hello.....
2006-03-04 by Garry Diver
Thanks, I got them. Garry
Re: Hello.....
2006-03-03 by Paul Weidner
Hi Garry, Emails for you at your msn email address, I m hoping we can get the shipping arrangements set up soon & get that car over here. (Maybe that kit
Re: [MarcosManiacs] Marcos in Virginia
2006-02-28 by Mike Sullivan
Just happens to be spring break (the boys are 6 and 10). Tentative plans are to go to BethPaigem in Urbana and I would have to pull some real strings to get
Re: [MarcosManiacs] Marcos in Virginia
2006-02-28 by Bob Magnotti
Gary, With an invitation like that you can bet I will be there! Will try to bring my Marcos and maybe we can have a parade. Michael are you going to this
Re: [MarcosManiacs] Marcos in Virginia
2006-02-28 by Garry Diver
Hi Bob, Your E mail reminded me that I shall be racing again at VIR in April. Hopefully with better results this time.the dates are 13th to 16th. If you would
Re: [MarcosManiacs] Marcos in Virginia
2006-02-28 by Bob Magnotti
Don, I thought Michael Crews lived in VA, but he actually is in WV with his yellow Volvo powered Marcos. There is a Red steel chassis Marcos in Northern VA.
Modification to the fan belt
2006-02-28 by Ash
Hi Guys, As many of you know I am still in the process of restoring my metal chassis V6 (previously v4). Progress is excellent I should be starting the engine
Another ebay car
2006-02-27 by Ash
http://cgi.ebay.co.uk/Marcos-Mantula-V8-Motorsport-TVR-LOOK-A- LIKE_W0QQitemZ4617167988QQcategoryZ29750QQrdZ1QQcmdZViewItem yet another car, interesting
Re: Hello.....
2006-02-27 by Paul Weidner
Thanks! ... about ... in ... Marcos. ... competitive ... (Mantaray), ... Service.
RE: [MarcosManiacs] Re: Hello.....
2006-02-27 by Garry Diver
Hi Paul , se my other reply. Garry
Re: Hello.....
2006-02-24 by Paul Weidner
Hi Garry, We haven t talked for a long time, I sent you an email this AM about shipping, not sure if you got it. Long story short, I have a car in England I
Marcos in Virginia
2006-02-24 by Don Lattimer
Bob, I only list two Marcos in VA, yours and Mike s. Do you have any details (names, phone numbers, etc.) of the others? Don #3M5759
RE: [MarcosManiacs] Re: Hello.....
2006-02-24 by Bob Magnotti
Mike, I have been hearing about your purchase of the Marcos from one of your TVR friends, Marshall Moore. I met Marshall at the 2004 Motor Madness gathering.
RE: [MarcosManiacs] Re: Hello.....
2006-02-24 by Mike Sullivan
Hello from South Eastern Virginia. As you may know I bought Bill Turners car #8153 3.5 V8 FI with only 10K on the odometer. I am taking it to Carlisle in May
RE: [MarcosManiacs] Re: Hello.....
2006-02-24 by Bob Magnotti
Hello from South Western Virginia, What a great idea and I really want to see you guys pull this tour off. If you find that your trip brings you through the
Welcome Cazzer
2006-02-23 by Don Lattimer
Hey Cazzer, Welcome to this side of the pond! Guess we ve known each other from the EZBoard Forum for a number of years. If you make it anywhere in
RE: [MarcosManiacs] Re: Hello.....
2006-02-23 by Garry Diver
Hi, I specialise in shipping cars in containers and can be competitive with Ro-Ro on the right route. My last shipment was a Marcos (Mantaray), Morgan and
Re: Hello.....
2006-02-23 by marcoscazzer
We re really up for the trip. Shipping is a bit of an issue as we de sooner do containerised shipping but RoRo is looking like all we can afford. Still, as
RE: [MarcosManiacs] Hello.....
2006-02-23 by Garry Diver
hi guys, Would love to see you in the States. If you make the trip on the Southern route you are very welcome in Atlanta. The advantage is that we have 10,000
Re: [MarcosManiacs] Hello.....
2006-02-23 by Meggsief@aol.com
if you come through Colorado I would love to knock back a pint. Hal 5353
Re: Hello.....
2006-02-23 by marcoscazzer
I don t think we re going to be able to manage that. As it stands at the mo, the cars will be arriving in Port Hueneme near LA. Quiff really wants to do Route
Re: [MarcosManiacs] Hello.....
2006-02-22 by Stephen Spalding
Marcoscazzer We have several cars in the San Francisco (Bay Area)! If you head north up the coast, I m sure we could get some of the cars together! Thanks
Hello.....
2006-02-22 by marcoscazzer
Hi Gang, I ve just joined yer select group. I m cazzer off the UK forum. Just thought I d let you know that Me and Quiffster are attempting to get our cars
Re: [MarcosManiacs] Paint types, etc.
2006-02-18 by Stephen Spalding
Donny I ve worked with West system epoxy for several years (my other toy is ketch). West now has several versions of their epoxy, keep us informed on your
Re: [MarcosManiacs] Paint types, etc.
2006-02-16 by Donny Lang
Don, Like many of the other replies, I suspect your problem lies deeper than the paint. My car has many cracks in the existing paint. On my car, these cracks
RE: [MarcosManiacs] Paint types, etc.
2006-02-16 by Garry Diver
Don Ronnie s point about getting out the stress fractures is VERY important. If you don t they remain as stress points even though they may look smooth after
Re: [MarcosManiacs] Paint types, etc.
2006-02-16 by Stephen Spalding
Don The question: is it the paint or the gel coat? If it is the paint the fix should be easy for the body shop, if they do work on other glass cars. If the
Re: [MarcosManiacs] Paint types, etc.
2006-02-15 by ronnie carter
i just got my respray done and my nose was crackin.they took it back to the fiberglass and get the stress fractures out then re-gel and spray... it is not just
Paint types, etc.
2006-02-15 by Don Lattimer
Hi folks, I m taking my nose section back to the shop for respray. When they did it last year something went wrong and it is cracking. Possibly they didn t