Re: [MarcosManiacs] Light Switch
2008-11-19 by larry meadows
I have one that I removed from my car when I re-made the dash panel. Attached are 2 pictures. The logo is very light and the keeper on one end is missing, but
Messages
Browse messages
Page 33 of 112 · 5570 messages matched
Re: [MarcosManiacs] Light Switch
2008-11-19 by Balloonblack@comcast.net
The switch is the dash switch for the headlights. Bill Black 3V5680 ... From: larry meadows To: MarcosManiacs@yahoogroups.com Sent:
Re: [MarcosManiacs] Light Switch
2008-11-19 by adrian.mann@talk21.com
They are the same as the switches in a Massey Ferguson Tractor that was built in the UK. A quick search of ebay and you will see a fan and wiper switch up for
Re: [MarcosManiacs] Light Switch
2008-11-19 by larry meadows
Bill, What does the switch operate? Larry 3v5536 ________________________________ From: balloonblack70 To:
Light Switch
2008-11-19 by balloonblack70
I am trying to source ths light switch for my 70 3L volvo.I tried an MG switch but it was too small. It is a Lucas switch with the number 39115 on the side. I
Marcos glass
2008-11-14 by jehu3098
The front screen would be laminated as this is a requirement for racing. The earlier cars (mine is 1969) have poor quality control on the rear windscren
Re: [MarcosManiacs] Rear Screens (window)
2008-11-14 by larry meadows
Dwayne, I the early 80 s, I did some rear wind screens and Marcos silk screened T-shirts for Bob Boston in Alfaretta Ga. He also tried the market by importing
Re: [MarcosManiacs] Rear Screens (window)
2008-11-14 by dcgrant@istar.ca
Larry: I m in Calgary, Alberta. As a note: at one point in the the early 80 s I was in discussions with Jem Marsh (Marcos) to sell Marcos Cars here, but the
RE: [MarcosManiacs] Rear Screens (window)
2008-11-14 by Roger
Hello Dwayne I am in Florida at moment. Go UK next week for a week or so. In 1972 I was racing a Marcos in UK. From: MarcosManiacs@yahoogroups.com
Re: [MarcosManiacs] Rear Screens (window)
2008-11-14 by larry meadows
Dwayne, Where are you located? I have a 1970 3l Marcos # 3V5536 that I have owned sense 1972. I too, have a running record of most of the differences on my
RE: [MarcosManiacs] Rear Screens (window)
2008-11-14 by Roger
Having run a race car manufacturing business myself in the UK - the truth is that with small companies there are always shortages of certain parts and I know
Re: [MarcosManiacs] Rear Screens (window)
2008-11-14 by Dwayne Grant
Roger: I find this very interesting being that there seems to be so many variations of differnt parts with a lot of the Marcos Cars from that era. In a letter
Re: [MarcosManiacs] Rear Screens (window)
2008-11-13 by Balloonblack@comcast.net
The windows I have are laminated glass. I owned a 3L Volvo from1971 to 1974 and it had a laminated glass rear screen that was original. I sold the car in
RE: [MarcosManiacs] Rear Screens (window)
2008-11-13 by Roger
Well Dwayne, all I know is that when I was talking to Gem Marsh when the straight 6 Volvo version first came out he told me that they had to get glass rear
Re: [MarcosManiacs] Rear Screens (window)
2008-11-13 by dcgrant@istar.ca
The regs were different back then. Mine is a 70 3 ltr Volvo LHD originally a USA imported into the state of NY before being exported to Edmonton AB, Canada and
Re: [MarcosManiacs] Rear Screens (window)
2008-11-13 by martin
my glass rear screen is laminated ... From: Roger To: MarcosManiacs@yahoogroups.com Sent: Thursday, November 13, 2008 4:20 PM Subject: RE: [MarcosManiacs] Rear
RE: [MarcosManiacs] Rear Screens (window)
2008-11-13 by Roger
For sure the new rear screen will not be plain glass that could break into shards. I believe all 3 litre Volvo powered cars that went to the USA had glass
Re: [MarcosManiacs] Rear Screens (window)
2008-11-13 by Donny Lang
The original Marcos glass rear windows are made of tempered glass (as are the side windows) - the same as all modern cars sold from the 1960s through present.
Re: [MarcosManiacs] Rear Screens (window)
2008-11-13 by braemar50
Hello, Real glass would be a structural benefit - I wonder did the build process include a mylar type film between two glass sheets for safety otherwise in an
Rear Screens (window)
2008-11-11 by balloonblack70
I had a crack in my plexiglass rear screen so I recently decided to get a real glass one . With the lelp of Paul Crocker of the Marcos Club in England I had 3
Re: [MarcosManiacs] Serial numbers, where are they?
2008-10-01 by adrian.mann@talk21.com
If you still have the original 4 speed gear box and overdrive fitted you may also find the chassis serial number stamped on the gearbox cross member. The
Re: [MarcosManiacs] Serial numbers, where are they?
2008-10-01 by Donny Lang
Steve, Larry told me where to look for my 1970 car, and I located my numbers on the panel behind the dash face, as well as the original color. Remove the
Re: [MarcosManiacs] Marcos 50th anniversary
2008-09-29 by Richard Porter
... Forget my last message! -- Richard Porter M I N I M A R C O S O W N E R S C L U B Webmaster/Archivist MINI JEM * KINGFISHER SPRINT *
Re: [MarcosManiacs] Marcos 50th anniversary
2008-09-29 by Richard Porter
... Mike, attachments get removed. Please could you save the letter as plain text and include it in the body of the message, or mail it to me direct. I ll send
Marcos 50th anniversary
2008-09-29 by Denman Mike
Ok, so I forgot to include the letter from Rory. Sorry... Here is the original email (again) along with the letter from Rory. Hi Group, I received the
Marcos 50th anniversary
2008-09-29 by Denman Mike
Hi Group, I received the following letter from Rory McMath of Pikes Associates. Rory is the owner of Marcos Heritage Spares Ltd. and Marcos Heritage Spares
FS: 1969 Marcos GT V6
2008-09-27 by Lotus fan
Time has come to split with my GT. Chassis no 3M5447, very good condition A few pictures can be found at http://www.haverstad.net/marcos/pictures.htm Car in
Re: Serial Number help
2008-09-26 by steve191127
Steve, Maybe a bit late to help out, and don t know US law as I m in the UK. My car is 1990, and still has the simple 4 digit chassis number (a Mantula), I
Serial Number help
2008-09-26 by hide809rig169
Thank you to all that have helped me on where to find serial numbers and encouragement. I have spent two mornings with the Department of Motor vehicle with
VIN numbers
2008-09-26 by Robert Moreno
Hello My serial numbers are neatly etched into the right hand window frame-visible inside the car under the quarter window. I have no pedal box cover or other
Re: [MarcosManiacs] Serial numbers, where are they?
2008-09-26 by Paul Dransfield
Hi Steve, It s rather telling that The inspector told me that the number on the foot box was a chassis number not the VIN . It s unfortunate you re dealing
Re: [MarcosManiacs] Serial numbers, where are they?
2008-09-26 by larry meadows
Steve, On the earlier cars, The serial no. is steel stamped on the left hand forward frame rail close to the upper shock mount (usually just forward of the
RE: [MarcosManiacs] Serial numbers, where are they?
2008-09-25 by Tess254
Steve My Marcos #5916 a 1971 was registered in Arizona for many years, and it when through the state DMV inspection centers with out a problem. The 1982 year
Re: Serial numbers, where are they?
2008-09-25 by Hampton Peterson
Steve, I do not think there are any other ID or VIN plates other than the one attached to the passenger footwell in the engine compartment. You may need to
Serial numbers, where are they?
2008-09-25 by hide809rig169
Motor Vehicle is inspecting my car tomorrow for serial numbers, I know there is one on the passenge side foot box, but are there any others? The inspector told
Re: Overdrive issues
2008-09-24 by Adrian
Hi, Click on the link to see a picture of the switch and bracket. My car was also missing this switch and it took me a long time to find the correct one.
Re: [MarcosManiacs] Overdrive issues
2008-09-24 by Lionel AGLAVE
on mine , i took away the inhibitor switch. You have super ratio between 2 and 3 and very close between 3 and 4. I don t use it in 1. I ve just fitted an
Overdrive issues
2008-09-23 by Hampton Peterson
Greetings, I have the Ford 4 speed with Laycock LH overdrive on my Essex V6. It is missing the switch that controls the reverse lights and (maybe) is the
Re: [MarcosManiacs] early 1800 gt
2008-08-26 by Denman Mike
Hi.... When I sent my message to Charley I didn t realize that the message was going out to the group. This was my mistake and I apologize. I try not to say
Re: early 1800 gt
2008-08-25 by Remco Bruins
Hi, Currently, I m having a 1600GT rebuilt by Wooden Wonders in Sweden.I have seen some of their work, including the Marcos 1800GT with the B20 engine that ran
Re: [MarcosManiacs] early 1800 gt
2008-08-25 by martin
this may inspire you a little http://marcossportscarenthusiasts.yuku.com/topic/3615 ... From: Baufi-Fey@web.de To: MarcosManiacs@yahoogroups.com Sent: Monday,
Re: [MarcosManiacs] early 1800 gt
2008-08-25 by Baufi-Fey@web.de
Hi Charley, your questions as far as I know the Marcos History: 1. no air vents on original early bonnets, for race GT´s they use very often a long bonnet
Re: [MarcosManiacs] early 1800 gt
2008-08-24 by Mike Denman
Hi Charley, I am probably the go to guy for 1800 GT s in the USA. As far as I know, I am the only person that currently has a 1800 GT that regularly drives
early 1800 gt
2008-08-24 by ukcharley
Howdy, I am new to the site and have a few questions. 1.) Did the early hoods (bonnets) not have air vents or the indentation for the insignia? 2.) Did the de
type9 gearbox info
2008-08-18 by martineztop
posted this item as there was a question some time back, stolen from another site but worth the read if you want 5 speeds
New file uploaded to MarcosManiacs
2008-08-18 by MarcosManiacs@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the MarcosManiacs group. File : /type9
Re: [MarcosManiacs] Re: Our Alaskan TV star ! **UPDATE**
2008-07-24 by Ray Rawlinson
I caught the show and recorded it on the DVR. Enjoyed it very much, amazing they condensed 1.5 hours of talking and filming into 5 minutes. Thanks for the
Re: Our Alaskan TV star ! **UPDATE**
2008-07-23 by Ed
Anyone else see the show? It looks to be about 5 minutes of air time. Dennis talks to Rick about the XKE bonnet look and the low heigth. GT40 type. It would be
Re: [MarcosManiacs] mini marcos tranny woes
2008-07-07 by Richard Porter
... What box is it (rod change, solid remote, magic wand/SPQR, 3-synchro)? Can you get the gear lever into the normal place for third and fourth? Has the first
mini marcos tranny woes
2008-07-07 by pinsx3
I was driving my mini marcos to the vintage races, pulled up to a stop and presto, no third or fourth gear, just missing, no grinding first second and reverse