Marcos Maniacs

----- Original Message -----

From: Laurie Sellers

To: MarcosManiacs@yahoogroups.com

Sent: Saturday, October 11, 2003 2:55 AM

Subject: [MarcosManiacs] Re: 1800 GT interior

Hi Jac
Maybe I am using a different interface to you (Microsoft Internet
Explorer) but I cannot see a paperclip.
What I do get is two boxes at the bottom of the message which I
think are your pictures. But in both cases they say "attachment not
stored" and if I click on them, nothing happens.
Maybe the photo file is still the best option?.
Thanks again for taking the trouble to help.
Regards
Laurie

--- In MarcosManiacs@yahoogroups.com, "Jack Myers"
wrote:
> Laurie
> The pictures have turned up with me. As you will know if I email
the maniacs then I will recieve the email my self.
> I know it may be a stupid question, bit did you click on the paper
clip.
> Any further problem let me know and I will see if I can up load
them to the photo file.
> Best regards Jac
> ----- Original Message -----
> ; From: Laurie Sellers
> To: MarcosManiacs@yahoogroups.com
> Sent: Friday, October 10, 2003 4:28 AM
> Subject: [MarcosManiacs] Re: 1800 GT interior
>;
>
> Hi Jac
> Unfortunately, the pictures do not seem to be attached.
> Where would I find them?.
> Perhaps it would be best to upload them into a photo file.
> Best regards
> Laurie #4026
>
> --- In MarcosManiacs@yahoogroups.com, "Jack Myers"
> wrote:
> > Hello Laurie
> > I hope these pics are of some help, more to follow later.
> > Regards Jac. # 4057
> > ----- Original Message -----
> > From: Laurie Sellers
> > To: MarcosManiacs@yahoogroups.com
> > Sent: Wednesday, October 08, 2003 6:02 AM
> > Subject: [MarcosManiacs] 1800 GT interior
> >
> >
> > Does anyone have detailed photo's of the original 1800 GT
> upholstery
> > and dashboard components?.
> > The race prepared car I recently puchased (#4026) has had
the
> > interior virtually stripped out, as is common practice for
> racing in
> > Europe to save weight.
> > I will need to restore some of the interior (with the help
of an
> > upholsterer) to comply with the local Australian rules for
> racing in
> > Group S Production Sports Car Class. As a minimum I will
need to
> > install a near replica of the seats. I am allowed install
ready
> made
> > racing seats "of period type" but the width between the door
> ; sills
> > and centre tunnel makes it difficult to find anything that
fits.
> So
> > it will probably be easier to get seat squabs and backrests
> custom
> > built in like the originals. Also, the dashboard would look
much
> > nicer if closer to original, it has been removed completely
and
> > replaced with a centre console housing a small cluster of
> > instruments and switches. I don't believe that either of
these
> > changes would add much in the way of weight (which racers
are
> > fanatical about...for good reason) but would add
tremendously to
> the
> > appeal.
> > So if anyone has photo's, possibly taken during restoration
> > (preferably of the seating components outside of the car) or
> specs
> > or drawings or patterns (well you never know!) and similar
for
> the
> > dashboard I would be most appreciative.
> > Thanks very much for your help.
> > Regards
> > Laurie #4026
> >
> >
> > Yahoo! Groups Sponsor
> ; > ADVERTISEMENT
> >
> >
> >
> ; >
> > To unsubscribe from this group, send an email to:
> > MarcosManiacs-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
> ;
>
>
>; To unsubscribe from this group, send an email to:
> MarcosManiacs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.



To unsubscribe from this group, send an email to:
MarcosManiacs-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.