Paul,
If you can get me his email address, I'll send him
an invite. It makes it easy to join. If not, have him go the main
page:
and it will have a join-up link.
Don Lattimer
#3m5759
----- Original Message -----From: pauldransfield@...Sent: Thursday, July 24, 2003 10:56 AMSubject: RE: [MarcosManiacs] Camber adjustmentHi Don,
I pulled into a local golf course parking lot last Saturday morning in my
Marcos and, as I got out of the car, a guy adjacent to me commented 'A
friend of mine has one of those'. That immediately got my attention and it
turns out that his friend has been restoring the car for quite some time. I
suggested the friend join our group but I've forgotten the membership
process. Could you please refresh my memory.
Thanks,
Paul Dransfield
3 litre Volvo
-----Original Message-----
From: Don Lattimer [mailto:donlattimer@...]
Sent: July 16, 2003 2:16 PM
To: MarcosManiacs@yahoogroups.com
Subject: [MarcosManiacs] Camber adjustment
The camber on my 1971 V6 (steel frame) is off. The effect is to
wear the tires on the inside. Too much negative camber.
Besides replacing the bushings, etc. any one have any suggestions?
I know the camber angle is built in and can't be adjusted but......?
Don Lattimer
#3m5759
Willits, CA, USA
To unsubscribe from this group, send an email to:
MarcosManiacs-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
To unsubscribe from this group, send an email to:
MarcosManiacs-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.