Marcos Maniacs

Hi Dave,

Yes, I'll have the Marcos at the show. I rebuilt my triple carbs over the
winter and got everything back together last weekend after waiting weeks for
the snow to melt around my way. I don't really understand why but there is a
very noticeable improvement in performance. The service kits mainly
consisted of gaskets and needle valves, but the car definitely has a lot
more oomph. I'm really looking forward to the outing.

You probably saw Ron McLeod's note, so look out for a light blue Mantis and
a Porsche tangerine coupe. See you on Sunday.

Paul Dransfield
3 litre Volvo


-----Original Message-----
From: Dave Barton [mailto:dbarton62@...]
Sent: April 15, 2003 5:43 PM
To: MarcosManiacs@yahoogroups.com
Subject: [MarcosManiacs] Re: Door waist seal


Hi Paul
  Will you have the Marcos there?.......there are going to be a few 
TVR's also........I will try and get there before 11
        Cheers Dave #5577


--- In MarcosManiacs@yahoogroups.com, pauldransfield@i... wrote:
> Hi Dave,
> 
> You mentioned that you were going to the Ancaster British car show, 
which is
> this Sunday, and I thought I'd let you know that I'll be there from 
around
> 9:30am to 11-ish. It's Easter Sunday and my wife's family always 
make a big
> thing about getting together so I gotta be there too. Hope to see 
you on
> Sunday.
> 
> Regards,
> 
> Paul Dransfield
> 3 litre Volvo
> 
> -----Original Message-----
> From: Dave Barton [mailto:dbarton62@y...]
> Sent: April 14, 2003 6:21 PM
> To: MarcosManiacs@yahoogroups.com
> Subject: [MarcosManiacs] Re: Door waist seal
> 
> 
>   
> 
> 
> Good tip Don
>     Just got the shell back from the upholsterer......will be 
> tackling the reassembly in the next few weeks........by the way I 
> have finally figured out my digital camera or at least my 12 year 
> daughter did , so I will post some decent pics soon.
>    Cheers Dave #5577  
> 
> 
> 
> 
> 
> 
> 
> 
> --- In MarcosManiacs@yahoogroups.com, "Don Lattimer" 
> <donlattimer@p...> wrote:
> > I finally tackled the door window seal replacement.  It's the one 
> > that is on the outside of the door glass that is almost 
impossible 
> > to change without 3 hands(or one arm that's REAL long).
> > 
> > The seal that fit is from the Triumph Spitfire.  About 4 inches 
> have 
> > to be removed from each end and then the metal strip that the 
> rubber 
> > is bonded to has to be slit so that the seal will conform to the 
> > curve of the frame.  Not too bad looking after install.  Just 
take 
> > your time and keep testing the fit as you trim it.
> > 
> > Don Lattimer
> > #3m5759
> 
> 
> 
> To unsubscribe from this group, send an email to:
> MarcosManiacs-unsubscribe@yahoogroups.com
> 
>  
> 
> Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/



To unsubscribe from this group, send an email to:
MarcosManiacs-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/