Marcos Maniacs

I finally tackled the door window seal replacement.  It's the one 
that is on the outside of the door glass that is almost impossible 
to change without 3 hands(or one arm that's REAL long).

The seal that fit is from the Triumph Spitfire.  About 4 inches have 
to be removed from each end and then the metal strip that the rubber 
is bonded to has to be slit so that the seal will conform to the 
curve of the frame.  Not too bad looking after install.  Just take 
your time and keep testing the fit as you trim it.

Don Lattimer
#3m5759