Marcos Maniacs

----- Original Message -----

From: Don Lattimer

To: MarcosManiacs@yahoogroups.com

Sent: Monday, January 27, 2003 11:25 PM

Subject: [MarcosManiacs] Re: Don Lattimer, Bonnet hinge.

Paul,

I uploaded the drawings (2) to the "Bonnet Hinge" photo album and
also moved the "spigot" pic into the album.

Jack, I apologize for not getting your approval before uploading the
pics. I just realized it and will remove them if you desire. Sorry!

Great idea!

Don Lattimer
#3m5759
Willits, CA, USA


--- In MarcosManiacs@yahoogroups.com, pauldransfield@i... wrote:
> Hi Don,
>
> Thanks for the feedback. I'd be very grateful if you sent me the
prints for
> the design. My current setup works OK but it isn't anything to
write home
> about.
>
> Regards,
> Paul
>
> -----Original Message-----
> From: Don Lattimer
> [mailto:donlattimer@p...]
> Sent: January 27, 2003 1:56 PM
> To: MarcosManiacs@yahoogroups.com
> Subject: [MarcosManiacs] Re: Don Lattimer, Bonnet hinge.
>
>
> Paul,
>
> That is Jack's fully adjustable setup that he designed and built.
> He sent me the prints for it a while ago. I can email them to you
> if you'd like.
>
> The "spigot" (concentric?)is attached to the 4 inch mounts you
> mention. You really have to see the pics to grasp it.
>
> Makes it adjustable up/down, front/back, and all points in-between.
>
> It is also in a back issue of the CMI or MOC mags. I'll check
> tonight when I get home.
>
> Don Lattimer
> #3m5759
> Willits, CA
>
>
> --- In MarcosManiacs@yahoogroups.com, pauldransfield@i... wrote:
> > Hey Jack,
> >
> > The bonnet hinge spigot in your photo is quite different from the
> > arrangement on the earlier cars. Mine is a '72 with similar
> chassis members
> > but the bonnet rotates on a pair of cylinders approximately 4"
in
> diameter
> > and 1 1/2" wide which are bolted in place of the spigot shown in
> your photo.
> > The bonnet has a pair plywood support pieces with 4" holes that
>; allow the
> > bonnet to rotate around the cylinders.
> >
> > Regards,
> >
> > Paul Dransfield
> > 3 litre Volvo
> >
> > -----Original Message-----
> > From: Jack Myers [mailto:jacob@m...]
> > Sent: January 24, 2003 3:28 PM
> > To: MarcosManiacs@yahoogroups.com
> > Subject: [MarcosManiacs] Don Lattimer, Bonnet hinge.
> >
> >
> > Hello Don
> > I was looking at some photo's when I came across this one of the
> bonnet
> > hinge spigot.
> > I hope it is of some help.(you should be able to blow it up to
get
> a really
> > good look).
> > Regards Jac.
> >
> > Yahoo! Groups Sponsor
> >
> > ADVERTISEMENT
> >
> >
>
<http://rd.yahoo.com/M=241773.2861420.4212388.2848452/D=egroupweb/S=1
> 7074905
> >
>
52:HM/A=1394046/R=0/*http://www.hgtv.com/hgtv/pac_ctnt/text/0,,HGTV_3
> 936_580
> > 2,FF.html> HGTV Dream Home Giveaway
> >
> > <http://us.adserver.yahoo.com/l?
> M=241773.2861420.4212388.2848452/D=egroupmai
> > l/S=:HM/A=1394046/rand=525204696>
> >
> > To unsubscribe from this group, send an email to:
> > MarcosManiacs-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
>
>
> To unsubscribe from this group, send an email to:
> MarcosManiacs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



To unsubscribe from this group, send an email to:
MarcosManiacs-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.