Marcos Maniacs

Ashley
	I've looked at several Marcos with roll bars installed.  The one
that Mike Denman but in his car was the best of the group, I think Mike said
he custom build his.  I suggest you contact him for any suggestions he might
have.
	Stephen
	2T5916

-----Original Message-----
From: a5h_pm [mailto:ashley_molyneux@...]
Sent: Wednesday, May 29, 2002 8:01 AM
To: MarcosManiacs@yahoogroups.com
Subject: [MarcosManiacs] Roll cage


Hello again,

You will be pleased to here my car is slowly progressing. This 
weekend I intend to attempt to trim some of the interior - thanks to 
those who let me know what is carpeted and what is vinyl/leather, I 
am sticking to the original vinyl for the moment at least until the 
car is running. Also thanks for the info on the sterring, I really 
did try many time to get the top section out to no avail! as it 
happens the whole shooting match is quite shot all the UJ's are 
really sloppy, that replacing it really is the only sensible thing to 
do.

A question for you guys, have any of you fitted a roll bar to the 
car? and if so what time where does it mount approx cost etc please? 
I am considering having one fitted before the glass goes in since 
this make the whole job that little bit easier! :-) Clearly visibilty 
will be further reduced if a diagonally braced whoop is fitted 
accross the rear seats but this would make an ideal place to mount a 
full harness etc and give me a little more confidence in the car!

Thanks once again, and I promise to add more pics to my site soon. 
BTW I have scanned in the build manual I recieved from Mike Denman 
and this should hopefully be available on the Marcos Maniacs site 
soon (Jeff is pretty busy by the sounds of things). I will also do 
the others as and when I get them,

Regards

Ashley
#5504

www.molyneuxs.com



To unsubscribe from this group, send an email to:
MarcosManiacs-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 

This message (including any attachments) contains confidential information
intended for a specific individual and purpose, and is protected by law.  If
you are not the intended recipient, you should delete this message.  Any
disclosure, copying, or distribution of this message, or the taking of any
action based on it, is strictly prohibited.