Marcos Maniacs

Hi Don,

I hope this info will help you.

The colour codes of the wires that you mention going to the two dash
switches if they conform to vehicle wiring standards should be as
follows :-

RED RED/WHITE  This switch should be the feed switch for the instrument
panel lights, the red wire being the switch feed from the main master
lighting switch and should only be live when the lights are on. The
red/white wire should branch off from this switch to supply the
instrument bulbs.

BLUE/WHITE BLUE/YELLOW  My car does not have a switch with these colour
codes but they would normally be used for long range driving lamps with
the blue/yellow wire running from the switch to supply the lamps and I
assume that the blue/white wire would be the switch feed from the main
beam circuit and would only be live when the main beam lights are on.



--
Lee Brinkley  #5097 1600 GT

lbrinkley@...
(044)(0)1277 261400
Fax: (044)(0)1277 261525

This message and any attachments are confidential and intended only for
the 
named recipient.  Views and opinions contained herein are those of the 
author unless clearly stated as being that of Roush.  If you are not the 
intended recipient please notify the sender immediately and do not 
disclose, copy or use the contents in any way.
Roush Technologies Limited.  Registration No. 3854474