Apple Logic Pro /LogicExpress Discussion

I'm not sure I understand what you're trying to do, but if you're not worried about time signature and just want the patterns to be right next to each other, you can select the regions and go to the "Region" menu and select "Tie Regions by Position Change".  

Also, if you want to fine tune placement of regions, click and hold on the region you are moving, THEN press the control key before moving the region.  That increases the resolution of movement in the arrange window.   Cntl-Shift increases resolution even further.  It's all in the manual, page 296 under "Overriding the Snap Grid."

Gregory




On Jul 16, 2010, at 5:02 PM, Eric Hightower wrote:

> Dear GA Moore,
> 
> Thank you for the suggestion.  I will try out your suggestion.
> 
> Eric H.
> On Jul 16, 2010, at 4:56 PM, GAmoore@... wrote:
> 
>> You might have to change the time signature to 6/4 or 10/4 or something 
>> to get an extra half measure. You can do this for the entire track, or 
>> just a section, or even just one bar.
>> 
>> -----Original Message-----
>> From: edhlaw1 <edhlaurita1@...>
>> To: Logic_Cafe@yahoogroups.com
>> Sent: Fri, Jul 16, 2010 10:25 am
>> Subject: [Logic_Cafe] Ultrabeat Indian & Middle Eastern Kit/Chaining 
>> Patterns Together
>> 
>> 
>> Good People,
>> 
>> I am trying to chain together patterns from the Indian kit together. 
>> For some reason, I cannot get the patterns to line up next to each 
>> other, there is either an overlap of the patterns or a half step space. 
>> Please, any advice would be appreciated.
>> 
>> Eric H.