Homebrew PCBs

In message <004001c4bc1e$081c7520$0900000a@tc>
          "Thomas" <teecee@...> wrote:

> 
> <Snip>
> Use couch\ufffd paper (a bright, wax-coated paper) of high thickness, and it will work flawlessly, if you dissolve the
> paper in water instead of peeling it from the board.
> <unsnip>
> 
> please Do tell us more about this paper, a google search on this has few worth while results..... :)
> Thomas

It sounds like the stuff glossy magazines are printed on. It might actually
be similar to the paper Microchip et al use for their flyers - glossy, about
100gsm, like thin card.
The stuff magazines are printed on tends to be much thinner - probably around
70gsm.

Later.
-- 
Phil.                              | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem@...              | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.me.uk/          | 48xCD, ARCINv6c IDE, SCSI
... Take care of the pennies and the Inland Revenue will take care of the rest.