I've just uploaded a pic of my latest efforts using an HP LaserJet 5P
to produce photo-etch artwork on tracing paper:
Photos>Leon's>Photo-etch PCB made with HP 5P
PCB material is Fotoboard (fibreglass/paper laminate) and the board
was etched in hot FeCl3 with continuous agitation. It took about 5
minutes. Tracks are conservative - 12 mils.
I'll be tryimng that lead-free solder I mentioned on this board when
I assemble it. It's actually a simple PIC ISP programmer (PARPIC)
driven from the PC printer port.
Leon
to produce photo-etch artwork on tracing paper:
Photos>Leon's>Photo-etch PCB made with HP 5P
PCB material is Fotoboard (fibreglass/paper laminate) and the board
was etched in hot FeCl3 with continuous agitation. It took about 5
minutes. Tracks are conservative - 12 mils.
I'll be tryimng that lead-free solder I mentioned on this board when
I assemble it. It's actually a simple PIC ISP programmer (PARPIC)
driven from the PC printer port.
Leon