Homebrew_PCBs

--- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan
<stefan_trethan@g...> wrote:

> doing small series really speeds up the learning curve...
>
> i tried 1 run through the fuser -> 2 small errors where the toner

didn't

> stick.
>
> later i remembered i used laquer thinner instead of denatuerd

alcohol to

> clean this time.
>
> so i made the 3rd board with denatured alcohol cleaning again and 1

run,

> -> no errors.

I have found that the slightest fingerprint on the surface will
prevent a good transfer.

Dave