Homebrew PCBs

On Sun, 09 May 2004 12:26:10 -0000, mikezcnc <eemikez@...> wrote:

> Stefan, Not to disagree with you, but I recently experimented with
> Epson 1520 which isa piezo printer and the printer doesn't like
> anything different than original Epson printer. After using an
> aftermarket ink the printer died and the printhead smoked (!)
>
> I'will remind that my experience with floor wax killed few printers.
> The feeding of PCB is easy the problem si the ink. I suggest that any
> printer that has a printhead with the cartridge is better because if
> something goes wrong it can be replaced...
>
> Mike
>
I agree the problem is the ink.

I have found no piezo printer that uses cartridges.

The 1520 seems pretty new? i hope the older 400/600/800 stylus color will
have a more basic head and be easier to work with.
there are differences in printhead construction, not all have exposed
electric parts.
(i guess your printer didn't like conductivity).

thanks

st