Homebrew PCBs

Hi Dave,

Do you have an item number or anything. I searched on 'Precise Cut' and
several other combinations but nothing came up.

--
Dave Hylands
Vancouver, BC, Canada
http://www.DaveHylands.com/


> -----Original Message-----
> From: Dave Mucha [mailto:dave_mucha@...] 
> Sent: Friday, May 07, 2004 5:55 AM
> To: Homebrew_PCBs@yahoogroups.com
> Subject: [Homebrew_PCBs] t-tech and Precise Cut on E-Bay
> 
> 
> Hi all,
> 
> in case you are interested, there is a Precise Cut unit on E-Bay 
> without the driver electronics.
> 
> 
> There is also a sample board they cut.  On the upper large pad, it is 
> not completely round.  ditto for the lower pad.
> 
> Also, some of the square pads, the trace enters the pad a little too 
> deeply.
> 
> Although it is not perfect, you can see it makes a very useable 
> board.  As many of these will.
> 
> It also shows the need for the additional ring traces on pads as 
> since that is where you solder, you need to be careful with a small 
> isolation.
> 
> Maybe I'll do a similar board with my machine to show some of the 
> features I like to use.
> 
> Dave