--- In Homebrew_PCBs@yahoogroups.com, Anthony Toft <toftat@c...>
wrote:
used it in the kinkos copier. However, the
stuff really doesn't come off easily. If you
are worried you can simply test it by bending
a sheet of test paper repeatedly. I never had
any problems with mine. The only time it seems
to come off easily is in the water (and then it
really just turns to goo)
wrote:
> On Mon, 2004-03-08 at 23:13, poitsplace wrote:Heh, I actually don't have a laser printer, I
> > It has to be a relatively thick coating...
> > not sure spray starch would do it (although
> > I have considered it)
> Doesn't it come off in the printer when the
> paper has to make a turn? I'd love to be
> able to make my own paper like this, but I'm
> a little leery of it clogging the printer up.
used it in the kinkos copier. However, the
stuff really doesn't come off easily. If you
are worried you can simply test it by bending
a sheet of test paper repeatedly. I never had
any problems with mine. The only time it seems
to come off easily is in the water (and then it
really just turns to goo)