Homebrew PCBs

Are you using Oki toner or aftermarket toner?

Thanks
Daryl Owen

-----Original Message-----
From: nuno-t [mailto:nuno-t@...]
Sent: Saturday, February 28, 2004 4:40 AM
To: Homebrew_PCBs@yahoogroups.com
Subject: RE: [Homebrew_PCBs] What printer to use for Toner Transfer.


Hi,

I'm also doing TT with an Oki printer. Is a OKIPAGE 8w lite (600dpi).
Very cheap printer with even cheaper toner.
The results are astounding with inkjet glossy/mate paper printed on the back
side. 8 mil tracks and large areas are not a problem.

Best,

Nuno T.

-----Original Message-----
From: Daryl Owen [mailto:picstuff@...]
Sent: sexta-feira, 27 de Fevereiro de 2004 16:46
To: Homebrew_PCBs@yahoogroups.com
Subject: [Homebrew_PCBs] What printer to use for Toner Transfer.


I planning on purchasing a used printer on Ebay for toner transfer.
I am currently using an Okidata 10EX with very poor results.
The toner will not adhere to the PCB regardless of how much heat or
pressure is used.

So any feedback on printers for this application would be useful.

Thanks

Daryl Owen

---
Outgoing mail is AVG certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.593 / Virus Database: 376 - Release Date: 20-02-2004




Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs
Yahoo! Groups Links