Homebrew PCBs

----- Original Message ----- 
From: "Daryl Owen" <picstuff@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Friday, February 27, 2004 4:46 PM
Subject: [Homebrew_PCBs] What printer to use for Toner Transfer.


> I planning on purchasing a used printer on Ebay for toner transfer.
> I am currently using an Okidata 10EX with very poor results.
> The toner will not adhere to the PCB regardless of how much heat or 
> pressure is used.
> 
> So any feedback on printers for this application would be useful.

I don't use TT any more, but my old LaserJet IIIp used to work quite well.

Leon
--
Leon Heller, G1HSM
Email: aqzf13@...
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html