I like that idea. I may play with that idea. I pretty much stick to 70 mm by 100 mm etching so perhaps a C clamp or a large jaw pliers that can reach 40mm (half way across the PCB.... would be good to hold the teeth cones. On 10/31/2017 10:18 AM, Dale Chatham dale.chatham@... [Homebrew_PCBs] wrote: > > The one thing one could do with the brass tubing is to make a conical > tool for both sides which will flange the tubing. Done right, it > would produce an airtight seal and solder would be superfluous (though > highly advised). > > > On 10/30/2017 9:03 PM, James bitsyboffin@... [Homebrew_PCBs] wrote: >> Without rivet heads, is it really any different than solid core wire >> of appropriate thickness? >> >> That aside, and against my own reservations, I've got some of these >> in my Aliexpress cart currently when I get around to clearing it out next >> >> https://goo.gl/QpDTnn >> >> (in case the listing goes, title is "1 Black Jar Boxed Bar Design >> 0.5mm Thickness Rivets Studs Gold Plated Metallic Japanese Style 3D >> Nail Art Decoration Accessories") >> >> I have absolutely no idea if they are solid, brass, copper, or maybe >> even plastic, but for $2 I figure it's worth a look. >> >> >> >> >> On Tue, Oct 31, 2017 at 6:06 AM, Rob roomberg@... >> <mailto:roomberg@...> [Homebrew_PCBs] >> <Homebrew_PCBs@yahoogroups.com >> <mailto:Homebrew_PCBs@yahoogroups.com>> wrote: >> >> I found brass tube >> > >
Message
Re: [Homebrew_PCBs] brass tube vias tooth press
2017-10-31 by Rob