Yahoo Groups archive

Homebrew_PCBs

Archive for Homebrew_PCBs.

Index last updated: 2026-03-30 01:05 UTC

Message

RE: [Homebrew_PCBs] WHAT is K1 1mH 400 ohm

2017-01-02 by Howard Chester

What is the component labeled K1 1mH 400 ohm on the right side of this
schematic?

http://www.learnmorsecode.com/laminator/gbc/pp330.jpg

As stated by other members posts, this is a single pole 12V relay.

The schematic has been created with National Instruments Multisim Program - Simulation. Schematic capture and PCB layout package.

In the Simulation (SPICE based) package various circuit paramaters can be altered "on the fly" while the simulation is running.

Using available real time instruments any part of the circuit can be probed and the results noted / plotted.

The NIMultisim BLUE package is available FREE from Mouser Electronics Components. It comes with a basic component libary, all other

component libary parts can be added as real parts from Mouser as a multipart SPICE Package with Schematic symbol and the corresponding PCB

Be warned, this download is very large (well into GBytes) and requires time and patience to confidently utalise all of the package features

Hope this helps, chester

Attachments

No local attachments were found for this message.