Homebrew PCBs

Yes Drill Bit City.  They have a 25 piece set with one drill each from #56
to #80 for $22.95. The drills are resharped tungsten carbide.

 

Jeff

 

  _____  

From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com]
On Behalf Of Bob AD5VJ
Sent: Monday, December 24, 2012 4:01 PM
To: Homebrew_PCBs@yahoogroups.com
Subject: [Homebrew_PCBs] Dremel tungsten drill bits

 

  

I like using my 395 Dremel rotary tool for drilling holes using the tungsten
bits with the 1/8" shank.

I have it all set up and its stable.

However, I only have the tungsten sizes:

.05 - .062 - .0787 and 3/32 these are not near small enough for pcb work
except the .0500 which destroys the smaller pads.

Been all over eBay and can only find - used - refurbished that are close,
but they are not very assorted in size and many sets only have a few of the
sizes I need smaller than .050

Example: "set of 50 - .0400 resharpened in plastic case"

The size is good but don't need 50 of the same size.

Does anyone know of a good resource for an assortment of the sizes we need
for pcb work?

Thanks 
Bob AD5VJ





[Non-text portions of this message have been removed]