Homebrew PCBs

Hi All,

I don't know happened to Ebay but it wigs out with the link below....

just do a search with Google for "straight shank collet chuck" you'll see a search result for Ebay about half way down, that will get you where you need to be...

Also you can search for "straight shank collet chuck" directly on Ebay and get slightly different results.

One seller seems pretty good, yes it's china, but look at the runout... seller name "ctctoolseller"


Later....

Kevin I.



________________________________
 From: Kevin Impson <internetgiest@...>
To: "Homebrew_PCBs@yahoogroups.com" <Homebrew_PCBs@yahoogroups.com> 
Sent: Saturday, September 29, 2012 2:51 PM
Subject: [Homebrew_PCBs] Re: Want to attach motor to 1/8" COLLET
 

  
Hi psykhon,

I did a little more refining on my search on Ebay try this one...

http://www.ebay.com/sch/sis.html?_nkw=ER20-STRAIGHT-SHANK-COLLET-CHUCK-TOOL-HOLDER-ER-20-

For a 1/8" collet you need the 4mm collet just to save you the time and hassle...

Best Regards,

Kevin I.

[Non-text portions of this message have been removed]


 

[Non-text portions of this message have been removed]