Homebrew PCBs

ok...here's what I found. A green scrubber and REAL nail polish remover (the
type with acetone) worked like MAGIC.

On Sun, Aug 15, 2010 at 8:02 AM, Chris <lcdpublishing@...> wrote:

>
>
> Removing toner does not require harsh industrial solvents. I use sandpaper
> and a sanding pad. It only takes a couple of seconds to remove the toner.
> Fine grit paper in the range of 320 grit works very well. If you don't want
> the toner dust getting on everything, buy wet/dry sandpaper and use water to
> wet sand the PCB.
>
> Chris
>
>  
>



-- 
Paul Mateer, AA9GG
Elan Engineering Corp.
www.elanengr.com
NAQCC 3123, SKCC 4628, FPQRP 2003


[Non-text portions of this message have been removed]