Homebrew PCBs

Thanks,

I had downloaded Ghostscript but the command line threw me. GSView takes the mystery out of it. 

The output is accurate too. Check with my calipers.
I used CAM output set to PS_Inverted to make the post script file.

I am pretty sure the image export is just a screen capture. The image size changed with the window size.

RD

--- In Homebrew_PCBs@yahoogroups.com, "awakephd" <a_wake@...> wrote:
>
> I'm assuming you are on a Windows platform? You might check out Ghostscript and GSView for Windows (http://pages.cs.wisc.edu/~ghost/doc/GPL/gpl864.htm). You might also look for ps2pdf -- if there is a Windows version?? With these tools, you can convert your postscript output into a PDF file. Ghostscript also lets you do a bunch of other things with postscript.
> 
> (All of this is built-in to most Linux distro's, by the way -- one of the many benefits of going Linux! Oops, sorry -- I forgot we weren't supposed to include religious posts ... :))
> 
> --- In Homebrew_PCBs@yahoogroups.com, "rdheiliger" <rdheiliger@> wrote:
> >
> > I followed the below steps, but can find no program that will print the negative scaled correctly. 
> > 
> > I also tried using the CAM output set to PS_Inverted (postscript), but can't find a simple way to print post scripts files. 
> > 
> > any suggestions on either??
> > 
> > RD
> > 
> > --- In Homebrew_PCBs@yahoogroups.com, "mahmoudfayezahmed" <mahmoudfayezahmed@> wrote:
> > >
> > > Go to the following menu to hide the components layout
> > > View->Display/hide layers and unselect the layers you don't want to 
> > > show. 
> > > I just unselect all then select the layers <Bottom, via, Pads>
> > > if you have double layer PCB then you can choose <Top, Via, Pads>
> > > 
> > > to get ready for printing do the following.
> > > 1- File->Export->Image.
> > > 2- Export your image.
> > > 3- Open it on MS Paint.
> > > 4- Press Ctrl+I
> > > 5- Save your image again
> > > 6- Print it.
> > > 
> > > Regrads,
> > > Fayez
> >
>