Homebrew PCBs

Hello Markus.



I’ll take a look and see what all is needed for this and post something
a.s.a.p.



I thought id’ make a quick point to let everyone know that an excellent
place to find various PCB equipment (used, but often in excellent
functioning condition) is DoveBid   http://www.dovebid.com/



This is an auction house.  Many circuit board shops have been closing over
the past couple of years (do to many factors), and just about every one of
them auctions their items off through DoveBid.  I’ve been to a few of the
auctions, and I can tell you that all of the stuff is going for pennies on
the dollar.  With this in mind, this might be a good place to gather the
items you need for solder masking (as well as any items for home etching).



Marty

-----Original Message-----
From: Zoran A. Scepanovic [mailto:zasto@...]
Sent: Thursday, May 22, 2003 6:08 PM
To: Markus Zingg
Subject: Re: [Homebrew_PCBs] Creating a professional looking solder stopp
mask



Hello Markus,

22. May 2003, 22:35:57, you wrote:

MZ> Hi Marty & Steve

MZ> Thanks for the pointers. I'm willing to take some effort to get a real
MZ> solder stop mask.

MZ> @Marty - I would be especialy interested how the dry film solder mask
MZ> technique works. I'm ready to let some dollars roll. I usually don't
MZ> need a solder stop mask since I'm hand soldering my prototypes, but
MZ> there are ocasions where I must create a prototype in a short time
MZ> that should look like one made in a board house and where time does
MZ> not allow to have it made externally. Could you therefore elaborate a
MZ> bit on how this is done, what equipement is needed, what a simple one
MZ> would aproximately cost and possibly where to get it?

MZ> @Steve - thanks for the pointers. I defniately will go through them.

MZ> Markus

www.thinktink.com

This is the place where you can spend some of your $$

A little bit more at:

http://www.thinktink.com/stack/volumes/volvi/pholam.htm


--
Best Regards,
Zoran
mailto:zasto@...






Yahoo! Groups Sponsor



<http://rd.yahoo.com/M=249982.3179269.4495679.1261774/D=egroupweb/S=17050832
91:HM/A=1524963/R=0/*http:/hits.411web.com/cgi-bin/autoredir?camp=556&lineid
=3179269∝=egroupweb&pos=HM>



<http://us.adserver.yahoo.com/l?M=249982.3179269.4495679.1261774/D=egroupmai
l/S=:HM/A=1524963/rand=665754829>


Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs

To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/>  Terms of Service.



[Non-text portions of this message have been removed]