Homebrew PCBs

Markus,
Can you tell us the size of the holes at the bottom (inlet) and the sides (outlet) of the spray tubes? Thanks
Regards
John C.


-----Original Message-----
From: Markus Zingg [mailto:m.zingg@...]
Sent: Friday, 23 May 2003 4:25 AM
To: Homebrew_PCBs@yahoogroups.com
Subject: Re: [Homebrew_PCBs] Etchant options?

 From the top to bottom there is a tube with fine holes in it. The tube is
turned from a motor that is mounted on top of the box cover. The tube
is having three bigger holes on it's lower end (it's otherwise
closed). 

http://www.myhome.ch/mzingg/pcbstuff/

Markus


Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs

To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/