Homebrew PCBs

Andrew wrote:
>> Roland F wrote:
>>
>> If you need to place jumper wires on the
>> PCB and you have to have the jumpers
>> insulated, there is a type of magnet
>> wire that has a type of insulation that 
>> quickly disintegrates when the heat from
>> a soldering iron is applied to it.
>>
>> I don't recall the name of this type of
>> coated magnet wire, but I think it is
>> readily available. I have a bunch of it
>> that I got from old inductances and
>> transformers.
> 
> Solderable Polyester Coated Wire.
> 
> There is also another type I sell called
> ButylBond which is a solderable polyester
> insulation with a butyl heat activated
> glue on the outside.
> 
>
Excellent. I will look some up.

Pete