Homebrew PCBs

On Sat, 17 Feb 2007 23:44:37 +0100, wnnelson0 <wnnelson@...>  
wrote:

>  I'm going back to photoresist for a while I know I can
> get a great board that way.


You can't!!!!!

I already went back to TT for that reason, you need to continue  
experimenting! ;-)

Look we are using regular ink in regular printers, so it should  
theoretically work without clogging all the time. At least i'm thinking  
printers are not meant to clog, i may be wrong, i don't use inkjets for  
regular printing. The only difference could be the heated boards, and i do  
not think direct inkjet is impossible without this, and i'm not even sure  
that caused the clog, most likely we both just got some air into the  
nozzles.

Anyway, i hope you continue trying, and other people as well. I will get  
back to it in a couple of months, i expect i will have to buy more ink to  
do so. I was hoping in the meantime someone would find a cheap easily  
available replacement for mispro but it will not be a problem either to  
spend the $ on ink in a few months if need be. I also need to make the  
curing oven, which means i need to make the controller for it first.

ST