Homebrew PCBs

hi

do you still have access to the press?
i think it would be very straightforward to also manufacture the stamp parts.

if you still have the unit you maybe can provide a quick drawing of the shape.

when i next order at reichelt in germany i will for sure order a bag of the rivets, i wantet this long 
ago but have forgotten to buy them as there was no actual need when ordering.

then i will try to get my hands on riveting stamps for hollow rivets (of course bigger ones).
i think i must have such stamps somewhere.

if i make a miniature version of this stamps they may work.

i will do this because i didn't find such pieces here, only the rivets. and i will not buy them at 
bungard (if i really want to spend that much i can have done the boards by a shop).

to try it it would be suficcient to put the one part of the stamp in the drill and the other part
down in the vice and use a working drill press. (powered off...)

but maybe for the very first try a vice, the 2 parts, and a hammer would also work.. like you do it with 
normal hollow rivets.



10.05.2003 19:30:59, Cristian <bip@...> wrote:

>>  It's only $10, so perhaps it might be worth 
>> it to by this part and fabricate the rest of this tool myself.
>> 
>> Cheers,
>> -Neil.
>I own the Bungard's original press.There is no need to buy the full press.
>One handy man can buy only the two parts (see Neil's mail) of the active
>head and to adapt a press from a drill-holder-press to accomodate them. Or
>to use any other hand press.
>Cristian
>
>
>
>Be sure to visit the group home and check for new Bookmarks and files:
>http://groups.yahoo.com/group/Homebrew_PCBs
>
>To unsubscribe from this group, send an email to:
>Homebrew_PCBs-unsubscribe@yahoogroups.com
>
> 
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
>
>
>